|
RIFLES / BLACK POWDER
Rifles or Black Powder Guns must be shipped in a plain box that does
not indicate there is a gun inside. This
is a new requirement from the ATF.
DO NOT SHIP THE ACTION OF ANY FIREARM
Guns must be completely taken down an shipped in
individual parts that are to be dipped, any disassembly by LCR
Hydrographic will be charged for at $45 per hour with 1hr min. |
Complete
Rifle or Black Powder
(Complete
rifle is Stock, Barrel, 1 Mag,
does not include trigger guard, bolt, or floor/butt
plate)
Floor/Butt
plates and actions are not done or recommended because these are high friction
parts
and will not be warranted. |
$225 |
Rifle or
Black powder stock
Floor/Butt
plates are not included or recommended because these are high friction
parts
and
will not be warranted. |
$100 |
Thumbhole Rifle Stock (Full Length)
Floor/Butt
plates are not included or recommended because these are high friction
parts
and
will not be warranted. stock double dipped for quality. |
$225 |
Thumbhole Rifle Stock (Butt Stock Only)
Floor/Butt
plates are not included or recommended because these are high friction
parts
and
will not be warranted. stock double dipped for quality. |
$125 |
| Rifle or
Black powder barrel only
|
$90 |
| |
|
| Receiver |
$75 |
| Bolts / Slides for auto's (Not
Warranted) |
$25 |
| Scopes (Not Warranted)
they will be done
solely at Owners risk |
$75 |
| Trigger Guard (Not Warranted)
they will be done
solely at Owners risk |
$15 |
| Floor/Butt plate (Not Warranted)
they will be done
solely at Owners risk |
$15 |
| Scope rings
and bases |
$20 |
| Magazines |
$25 |
| Cleaning
fees (applies
to dirty gun parts, please clean before shipping) |
$25 |
|
Tape removal (please
remove tape and sticky residue to avoid this fee) |
$25 |
|
Removal &
Install of T/C Flextech, Benelli's ComforTech |
$50 |
SHOTGUNS
Shotguns must be shipped in a plain box that does not indicate there
is a gun inside. This is a new requirement from the ATF.
DO NOT SHIP THE ACTION OF ANY FIREARM
Shotguns must be completely taken down an shipped in
individual parts that are to be dipped, any disassembly by LCR
Hydrographic will be charged for at $45 per hour. |
Complete
Shotgun (single barrel)
Complete
shotgun includes stock, forearm, barrel and magazine cap.
Floor/Butt plates and actions are not recommended because these are
high friction parts and will not be warranted. |
$225 |
Complete Over/Under Shotgun or Side by Side
Complete
shotgun includes stock, forearm, barrel and magazine cap.
Floor/Butt plates and actions are not done or recommended because these are
high friction parts
and will not be warranted. |
$250 |
| Shoulder
Stock only
(Floor/Butt plate not included) |
$75 |
| Forearm
only
|
$70 |
| Barrel
only (single) |
$80 |
| Barrel- Over/Under or Side by Side |
$150 |
| Receiver
only |
$80 |
| Choke
tubes |
$20 |
| Bolts / Slides for auto's (Not
Warranted) |
$20 |
| Floor/Butt plate (Not Warranted)
they will
be done solely at Owners risk |
$15 |
| Trigger Guard (Not Warranted)
they will be done
solely at Owners risk |
$15 |
| |
|
| Scope
rings and bases |
$20 |
| Cleaning
fees (applies
to dirty gun parts, please clean before shipping) |
$25 |
|
Tape removal
(please remove tape and sticky residue to avoid this
fee)
|
$25 |
|
Removal & Install of T/C Flextech, Benelli's ComforTech |
$50 |
HANDGUNS
Handguns must be shipped in a plain box that does not indicate
there is a gun inside. This is a new requirement from the ATF.
Handguns must be completely taken down an shipped in
individual parts that are to be dipped, any disassembly by
LCR Hydrographic will be charged for at $45 per hour, 1hr min. |
|
Semi Auto slide Only |
$80 |
|
Semi Auto Grips (one pair) |
$30 |
|
Semi Auto lower frame |
$80 |
| Revolver Frame only |
$80 |
|
Revolver Cylinder Only |
$50 |
|
Revolver Grips (one pair) |
$30 |
|
Polymer Handgun Holster (exterior only) |
$50 |
| |
|
|
Cleaning fees (applies
to dirty gun parts, please clean before shipping) |
$25 |
|
Tape
removal (please remove tape and sticky residue to
avoid this fee) |
$25 |
| |
|
AR type rifles
|
Complete Rifle |
$320 |
|
Two
Piece Upper Receiver |
$125 |
|
Upper Receiver Only |
$60 |
| Collapsible AR Stock |
$90 |
|
Standard Stock Only |
$70 |
|
Barrel Only |
$70 |
|
Rail system AR hand guard |
$80 |
|
Magazines |
$25 |
Paintball / Airsoft Guns and
Accessories
|
Complete Gun / marker |
$90 |
|
Hopper |
$25 |
|
Face Mask |
$65 |
| Storage containers |
$25 |
| Hand Guards |
$25 |
|
Tactical stocks |
$50 |
|
M4 style complete gun |
$175 |
|
Solid Stock |
$50 |
|
Upper Receiver |
$40 |
|
Lower Receiver |
$40 |
|
Grips |
$20 |
|
Air tank |
$65 |
ARCHERY
All bows must be completely broke
down an shipped in individual parts that are to be dipped
|
| Complete
Bow (limbs, pockets, riser) |
$190 |
| Riser
Only |
$90 |
| Limbs
only (2 each) |
$100 |
| Cams (2
each) |
$40 |
| Hand Grip |
$50 |
| Quiver
(top only) |
$30 |
|
Stabilizer (up to 12") |
$30 |
|
Stabilizer ( 12" - 16")
Over
16" add $2 per inch |
$35 |
| Complete Crossbow (no scope) |
$225 |
Taxidermy
|
Skulls must be clean an
ready to dip.
If you would like us to clean the skulls there will be a extra
fee added as per this price list.
|
| Deer Skull only, no lower
jaw |
$90 |
| Deer Skull w/lower jaw |
$125 |
| Bear Skull up to 19" ( L +
W) complete- upper an lower jaw |
$110 |
| Bear Skull 19-1/16" - 21" ( L +
W) complete- upper an lower jaw |
$120 |
| Bear Skull over 21-1/16" ( L + W)
complete- upper an lower jaw |
$140 |
| African Cape Buffalo |
$200 |
| African Lion upper an lower jaw |
$200 |
| African Leopard, Mt Lion, upper
an Lower jaw |
$175 |
| African Antelope Large, Kudu,
Eland, Zebra, Wildebeest, etc. |
$150 |
| African Antelope Medium, Blesbok,
Impala, etc. |
$125 |
| African Antelope Small, Dikers,
Steenbok, etc. |
$100 |
| Wild Boar, Warthog, etc skull no lower skull |
$150 |
| Wild Boar, Warthog, etc. with
lower jaw |
$200 |
| Predator, upper an lower jaw (
Fox, Coyote, Bobcat, Jackal, etc.) |
$100 |
| Small animals, (squirrels,
rabbit, etc.) |
$50 |
| Antlers ( depending on
size) |
Call |
| Cleaning Deer skull, no lower jaw |
$60 |
| Cleaning Deer skull w/ lower jaw |
$85 |
| Cleaning Boar, pig, type skull ,
no lower jaw |
$100 |
| Cleaning Bear, Mt Lion,
skulls with lower jaw |
$125 |
| Cleaning Predator ( bobcat, fox,
etc.) |
$75 |
| |
|
| Plaques, depending on size an
style, please also see web site |
Call |
Automotive
|
All Automotive parts must be clean from
grease, dirt, etc an ready to dip. |
| Single Valve Cover |
$80 |
| Pair of Valve Covers |
$140 |
| Truck Mirrors (one pair) |
$100 |
| Car Mirrors ( one pair) |
$90 |
| Air Breather |
$75 |
| Dashboard |
call |
| Fender Flares, each |
$75 |
| Tail Light covers ( pair) |
$40 |
| Door handles ( pair) |
$40 |
| |
|
| Wheels set of 4 ( up to 16") |
$280 |
| Wheels set of 4 ( 17") |
$295 |
| Wheels set of 4 ( 18"-20") |
$325 |
| Center caps for wheels, each |
$15 |
| ATV or Golf cart wheels set of 4
|
$160 |
| |
|
| Motorcycle Gas tank |
$190 |
| Motorcycle fenders (2) |
$180 |
| Motorcycle / Bike type Helmets ( no
face guard ) |
$100 |
| Racing type helmets with a face
guard |
$185 |
| Welding type helmets , Extra colors $25 each |
$150 |
Miscellaneous
|
